Toolox 46 – pre-hardened steel for hot work
SSAB tool steel for hot work, supplied quenched and tempered at 430 – 490 HBW
Toolox 46 is the newest and hardest grade in the SSAB Toolox family: supplied quenched and tempered at 430 – 490 HBW (≈ 47 HRC), as plate, bar and forged block. It was made for hot work, such as forging, die casting and aluminum extrusion, and arrives ready to machine.
Designations and equivalents
| System | Designation |
|---|---|
| UNS | — (proprietary steel) |
| W.Nr./EN | — (proprietary steel) |
| Trade names | Toolox 46 (SSAB) |
| Others | Same family: Toolox 33, Toolox 40 and Toolox 44 |
Standards by product form
| Form | Standard |
|---|---|
| Plate (60 – 130 mm) | SSAB specification; EN 10029 tolerances; EN 10160 ultrasonic testing |
| Forged block (170 – 320 mm) | SSAB specification; EN 10228-3 ultrasonic testing |
| Round bar (Ø 151 – 353 mm) | SSAB specification; EN 10060 tolerances; EN 10308 ultrasonic testing |
| Hardness | EN ISO 6506-1 (Brinell) |
Tolerances and HS codes
- Forged bars (round and square): machining allowance from 2 mm (Ø 6–16 mm) to 24 mm (Ø 400–500 mm) on the diameter. E.g. Ø 100–125 mm finished: +7 mm, tolerance +6 / −0 (length up to 3,500 mm).
- Forged discs: allowance of 4 to 9 mm on the diameter and 3 to 11 mm on the height, plus-only tolerance.
- Cutting and machining: band saw −0 / +5 to +15 mm on length; waterjet +10 % of thickness on the diameter (min. 2 mm); machined parts −0 / +2 to +5 mm on the diameter. See the full tables (INF 002 and INF 003, the same for every alloy).
| Form | NCM (Brazil, 8 digits) | HS (international, 6 digits) | HTS (USA, 10 digits)* | CN (European Union, 8 digits)* |
|---|---|---|---|---|
| Forged bar | 7228.40.00 | 7228.40 | 7228.40.0000 | 7228 40 90 |
| Hot-rolled bar | 7228.30.00 | 7228.30 | 7228.30.8041 | 7228 30 61 |
| Plate (> 10 mm, width ≥ 600 mm) | 7225.40.90 | 7225.40 | 7225.40.3050 | 7225 40 40 |
| Flange and fitting | 7307.91.00 | 7307.91 | 7307.91.5030 | 7307 91 00 |
Tariff class: alloy steel (by chemical composition, under the Chapter 72 Notes and Section XV Note 5).
*: US and EU codes for reference. NCM per current legislation (General Rules of Interpretation, Notes to Chapters 72, 74 and 75 and Section XV Note 5). Confirm the final code with your customs broker according to the item size and finish. HS = first 6 digits of the NCM.
Chemical composition (%)
typical composition published by SSAB; the value for each heat is on the certificate
| Element | Range (%) |
|---|---|
| C | 0.34 (typical) |
| Si | 1.1 (typical) |
| Mn | 0.8 (typical) |
| Cr | ≤ 2.1 |
| Ni | ≤ 1.8 |
| Mo | ≤ 2.6 |
| V | ≤ 0.2 |
Calculate the carbon equivalent of Toolox 46 – pre-hardened steel for hot work for welding →
Mechanical properties
Quenched and tempered at a minimum of 590 °C (delivery condition); hardness and Charpy guaranteed by SSAB, typical strength (SSAB does not publish minimum tensile values for this grade)
| Property | Value |
|---|---|
| Hardness | 430 – 490 HBW (≈ 47 HRC nominal) |
| Charpy V at 20 °C | ≥ 8 J (plate); ≥ 11 J (forged block and bar) |
| Yield strength Rp0.2 at 20 °C | 1,370 MPa (typical) |
| Yield strength Rp0.2 at 300 °C | 1,170 MPa (typical) |
| Yield strength Rp0.2 at 400 °C | 1,080 MPa (typical) |
Typical physical properties
| Property | Value |
|---|---|
| Density | ≈ 7.85 g/cm³ (typical for alloy steel) |
Calculate the weight of Toolox 46 – pre-hardened steel for hot work bar, plate or pipe →
Heat treatment, welding and machining
| Item | Usual practice |
|---|---|
| Service temperature | Keeps its delivery properties after being heated up to 590 °C, the minimum factory tempering temperature; above that, SSAB does not guarantee the properties. Made for hot-work tools, which keep their strength at 300 – 400 °C. |
| Heat treatment | Supplied quenched and tempered, with its final properties: no further treatment is needed. Heating above 590 °C voids the SSAB guarantees. Accepts nitriding (typically at 520 °C), laser or induction surface hardening and PVD coatings applied below 590 °C; under these conditions the core properties do not change. |
| Welding | Weldable and cuttable by thermal processes, with a low-hydrogen process and preheating according to thickness, following SSAB's welding recommendations for Toolox. Cold waterjet cutting is an alternative to thermal cutting. |
| Machining | Machined in the delivery condition with ordinary carbide tools. Since it is not quenched after machining and has low residual stress, the part does not distort or need corrective grinding. |
Plan an open-die forging in Toolox 46 – pre-hardened steel for hot work: reduction, slenderness and how much material to send →Simulate the cutting plan of the ingot or bar →
Typical applications
- Hot forging dies
- Die casting molds
- Aluminum extrusion tools
- Tools and components under heavy hot loads
Alternatives: Toolox 44, from the same family, with slightly less hardness and more toughness; hot-work tool steels such as H13 (1.2344), which need quenching and tempering after machining.
Frequently asked questions
What is the chemical composition of Toolox 46?
Per typical composition published by SSAB; the value for each heat is on the certificate: C 0.34 (typical); Si 1.1 (typical); Mn 0.8 (typical); Cr ≤ 2.1; Ni ≤ 1.8; Mo ≤ 2.6.
Which standards cover Toolox 46?
Plate (60 – 130 mm): SSAB specification; EN 10029 tolerances; EN 10160 ultrasonic testing. Forged block (170 – 320 mm): SSAB specification; EN 10228-3 ultrasonic testing. Round bar (Ø 151 – 353 mm): SSAB specification; EN 10060 tolerances; EN 10308 ultrasonic testing. Hardness: EN ISO 6506-1 (Brinell).
Up to what temperature can Toolox 46 be used?
Keeps its delivery properties after being heated up to 590 °C, the minimum factory tempering temperature; above that, SSAB does not guarantee the properties. Made for hot-work tools, which keep their strength at 300 – 400 °C.
Which materials can replace Toolox 46?
Toolox 44, from the same family, with slightly less hardness and more toughness; hot-work tool steels such as H13 (1.2344), which need quenching and tempering after machining.
Where to buy Toolox 46 in Brazil?
Dustre supplies Toolox 46 as bar, plate, tube, block and forged or machined parts, subject to availability, with a quality certificate. Head office in Osasco/SP, branches in Joinville/SC and Baixo Guandu/ES, delivery across Brazil and export worldwide (export documents and 3.1 certificate; Incoterm agreed in the quote). For a quote, message Helena, our virtual assistant on WhatsApp +55 11 98649-0075, or write to [email protected].
Toolox is a registered trademark of the SSAB group.