Toolox 40 – pre-hardened steel for molds and components
SSAB tool and engineering steel, supplied quenched and tempered at 360 – 420 HBW
Toolox 40 is the plate in the SSAB Toolox family supplied quenched and tempered at 360 – 420 HBW (≈ 40 HRC), ready to machine, with no heat treatment afterward. According to SSAB, it machines like P20 (1.2311) even with almost 100 HBW more.
Designations and equivalents
| System | Designation |
|---|---|
| UNS | — (proprietary steel) |
| W.Nr./EN | — (proprietary steel) |
| Trade names | Toolox 40 (SSAB) |
| Others | Same family: Toolox 33, Toolox 44 and Toolox 46 |
Standards by product form
| Form | Standard |
|---|---|
| Plate (6 – 130 mm) | SSAB specification; EN 10029 tolerances; EN 10160 ultrasonic testing |
| Hardness | EN ISO 6506-1 (Brinell) |
Tolerances and HS codes
- Forged bars (round and square): machining allowance from 2 mm (Ø 6–16 mm) to 24 mm (Ø 400–500 mm) on the diameter. E.g. Ø 100–125 mm finished: +7 mm, tolerance +6 / −0 (length up to 3,500 mm).
- Forged discs: allowance of 4 to 9 mm on the diameter and 3 to 11 mm on the height, plus-only tolerance.
- Cutting and machining: band saw −0 / +5 to +15 mm on length; waterjet +10 % of thickness on the diameter (min. 2 mm); machined parts −0 / +2 to +5 mm on the diameter. See the full tables (INF 002 and INF 003, the same for every alloy).
| Form | NCM (Brazil, 8 digits) | HS (international, 6 digits) | HTS (USA, 10 digits)* | CN (European Union, 8 digits)* |
|---|---|---|---|---|
| Forged bar | 7228.40.00 | 7228.40 | 7228.40.0000 | 7228 40 90 |
| Plate (> 10 mm, width ≥ 600 mm) | 7225.40.90 | 7225.40 | 7225.40.3050 | 7225 40 40 |
Tariff class: alloy steel (by chemical composition, under the Chapter 72 Notes and Section XV Note 5).
*: US and EU codes for reference. NCM per current legislation (General Rules of Interpretation, Notes to Chapters 72, 74 and 75 and Section XV Note 5). Confirm the final code with your customs broker according to the item size and finish. HS = first 6 digits of the NCM.
Chemical composition (%)
typical composition published by SSAB; the value for each heat is on the certificate
| Element | Range (%) |
|---|---|
| C | 0.28 (typical) |
| Si | 1.1 (typical) |
| Mn | 0.8 (typical) |
| P | ≤ 0.011 |
| S | ≤ 0.003 |
| Cr | ≤ 1.60 |
| Ni | ≤ 1.0 |
| Mo | ≤ 0.80 |
| V | ≤ 0.12 |
Mechanical properties
Quenched and tempered at a minimum of 590 °C (delivery condition); hardness and Charpy guaranteed by SSAB, typical strength (SSAB does not publish minimum tensile values for this grade)
| Property | Value |
|---|---|
| Hardness | 360 – 420 HBW (≈ 40 HRC nominal) |
| Charpy V at 20 °C | ≥ 20 J |
| Yield strength Rp0.2 at 20 °C | 1,150 MPa (typical) |
| Tensile strength at 20 °C | 1,290 MPa (typical) |
Typical physical properties
| Property | Value |
|---|---|
| Density | ≈ 7.85 g/cm³ (typical for alloy steel) |
Calculate the weight of Toolox 40 – pre-hardened steel for molds and components bar, plate or pipe →
Heat treatment, welding and machining
| Item | Usual practice |
|---|---|
| Service temperature | Keeps its delivery properties after being heated up to 590 °C, the minimum factory tempering temperature; above that, SSAB does not guarantee the properties. |
| Heat treatment | Supplied quenched and tempered, with its final properties: no further treatment is needed. Heating above 590 °C voids the SSAB guarantees. Accepts nitriding (typically at 520 °C), laser or induction surface hardening and PVD coatings applied below 590 °C; under these conditions the core properties do not change. |
| Welding | Weldable and cuttable by thermal processes, with a low-hydrogen process and preheating according to thickness, following SSAB's welding recommendations for Toolox. Cold waterjet cutting is an alternative to thermal cutting. |
| Machining | Machined in the delivery condition with ordinary carbide tools. Since it is not quenched after machining and has low residual stress, the part does not distort or need corrective grinding. According to SSAB, machinability is similar to that of P20 (1.2311), despite the higher hardness. |
Plan an open-die forging in Toolox 40 – pre-hardened steel for molds and components: reduction, slenderness and how much material to send →Simulate the cutting plan of the ingot or bar →
Typical applications
- Plastic molds
- Machine components
- Parts now made in P20 that need more hardness
Alternatives: Toolox 33, from the same family, with more toughness, and Toolox 44, with more hardness; pre-hardened P20 steel (1.2311), with lower hardness.
Frequently asked questions
What is the chemical composition of Toolox 40?
Per typical composition published by SSAB; the value for each heat is on the certificate: C 0.28 (typical); Si 1.1 (typical); Mn 0.8 (typical); P ≤ 0.011; S ≤ 0.003; Cr ≤ 1.60.
Which standards cover Toolox 40?
Plate (6 – 130 mm): SSAB specification; EN 10029 tolerances; EN 10160 ultrasonic testing. Hardness: EN ISO 6506-1 (Brinell).
Up to what temperature can Toolox 40 be used?
Keeps its delivery properties after being heated up to 590 °C, the minimum factory tempering temperature; above that, SSAB does not guarantee the properties.
Which materials can replace Toolox 40?
Toolox 33, from the same family, with more toughness, and Toolox 44, with more hardness; pre-hardened P20 steel (1.2311), with lower hardness.
Where to buy Toolox 40 in Brazil?
Dustre supplies Toolox 40 as bar, plate, tube, block and forged or machined parts, subject to availability, with a quality certificate. Head office in Osasco/SP, branches in Joinville/SC and Baixo Guandu/ES, delivery across Brazil and export worldwide (export documents and 3.1 certificate; Incoterm agreed in the quote). For a quote, message Helena, our virtual assistant on WhatsApp +55 11 98649-0075, or write to [email protected].
Toolox is a registered trademark of the SSAB group.