Dustre
EN
Customer area

Toolox 33 – high-toughness pre-hardened steel

SSAB tool and engineering steel, supplied quenched and tempered at 275 – 325 HBW

Download data sheet (PDF)

Toolox 33 is the toughest grade in the SSAB Toolox family: plate supplied quenched and tempered at 275 – 325 HBW (≈ 30 HRC), ready to machine, with no heat treatment afterward. It is used in molds and machine components that call for toughness and dimensional stability.

Technical review Oct 2026 · minimum values per the cited standard; physical properties are typical; values marked * to be confirmed in the standard · Clóvis de Oliveira Júnior · how we review

FamilyAlloy steel
UNS— (proprietary steel)
W.Nr. / EN— (proprietary steel)
Carbon equivalent CEV (IIW)0.65 (typical)
Nominal hardness≈ 30 HRC (300 HBW)

Designations and equivalents

Designations of Toolox 33 – high-toughness pre-hardened steel
SystemDesignation
UNS — (proprietary steel)
W.Nr./EN — (proprietary steel)
Trade names Toolox 33 (SSAB)
Others Same family: Toolox 40, Toolox 44 and Toolox 46

Standards by product form

Standards for Toolox 33 – high-toughness pre-hardened steel
FormStandard
Plate (6 – 130 mm) SSAB specification; EN 10029 tolerances; EN 10160 ultrasonic testing
Hardness EN ISO 6506-1 (Brinell)

Tolerances and HS codes

  • Forged bars (round and square): machining allowance from 2 mm (Ø 6–16 mm) to 24 mm (Ø 400–500 mm) on the diameter. E.g. Ø 100–125 mm finished: +7 mm, tolerance +6 / −0 (length up to 3,500 mm).
  • Forged discs: allowance of 4 to 9 mm on the diameter and 3 to 11 mm on the height, plus-only tolerance.
  • Cutting and machining: band saw −0 / +5 to +15 mm on length; waterjet +10 % of thickness on the diameter (min. 2 mm); machined parts −0 / +2 to +5 mm on the diameter. See the full tables (INF 002 and INF 003, the same for every alloy).
Tariff classification of Toolox 33: NCM, HS, HTS and CN by product form
FormNCM (Brazil, 8 digits)HS (international, 6 digits)HTS (USA, 10 digits)*CN (European Union, 8 digits)*
Forged bar7228.40.007228.407228.40.00007228 40 90
Plate (> 10 mm, width ≥ 600 mm)7225.40.907225.407225.40.30507225 40 40

Tariff class: alloy steel (by chemical composition, under the Chapter 72 Notes and Section XV Note 5).

*: US and EU codes for reference. NCM per current legislation (General Rules of Interpretation, Notes to Chapters 72, 74 and 75 and Section XV Note 5). Confirm the final code with your customs broker according to the item size and finish. HS = first 6 digits of the NCM.

Chemical composition (%)

typical composition published by SSAB; the value for each heat is on the certificate

Chemical composition of Toolox 33 – high-toughness pre-hardened steel, per typical composition published by SSAB; the value for each heat is on the certificate
ElementRange (%)
C 0.23 (typical)
Si 1.1 (typical)
Mn 0.8 (typical)
P ≤ 0.011
S ≤ 0.003
Cr ≤ 1.60
Ni ≤ 1.0
Mo ≤ 0.80
V ≤ 0.12

Calculate the carbon equivalent of Toolox 33 – high-toughness pre-hardened steel for welding →

Mechanical properties

Quenched and tempered at a minimum of 590 °C (delivery condition); minimum values guaranteed by SSAB

Mechanical properties of Toolox 33 – high-toughness pre-hardened steel
PropertyValue
Hardness 275 – 325 HBW (≈ 30 HRC nominal)
Yield strength Rp0.2 ≥ 700 MPa
Tensile strength ≥ 800 MPa
Elongation A5 ≥ 10%
Charpy V at 20 °C ≥ 35 J

Typical physical properties

Typical values at 20 °C
PropertyValue
Density ≈ 7.85 g/cm³ (typical for alloy steel)

Calculate the weight of Toolox 33 – high-toughness pre-hardened steel bar, plate or pipe →

Heat treatment, welding and machining

ItemUsual practice
Service temperature Keeps its delivery properties after being heated up to 590 °C, the minimum factory tempering temperature; above that, SSAB does not guarantee the properties.
Heat treatment Supplied quenched and tempered, with its final properties: no further treatment is needed. Heating above 590 °C voids the SSAB guarantees. Accepts nitriding (typically at 520 °C), laser or induction surface hardening and PVD coatings applied below 590 °C; under these conditions the core properties do not change.
Welding Weldable and cuttable by thermal processes, with a low-hydrogen process and preheating according to thickness, following SSAB's welding recommendations for Toolox. Cold waterjet cutting is an alternative to thermal cutting.
Machining Machined in the delivery condition with ordinary carbide tools. Since it is not quenched after machining and has low residual stress, the part does not distort or need corrective grinding.

Plan an open-die forging in Toolox 33 – high-toughness pre-hardened steel: reduction, slenderness and how much material to send →Simulate the cutting plan of the ingot or bar →

Typical applications

  • Plastic molds
  • Machine components that call for toughness
  • Engineering parts with heavy machining and dimensional stability

Alternatives: Toolox 40 and Toolox 44, from the same family, with higher hardness; pre-hardened P20-type steels (1.2311) and quenched and tempered 4140 steel, with similar hardness and less toughness.

Frequently asked questions

What is the chemical composition of Toolox 33?

Per typical composition published by SSAB; the value for each heat is on the certificate: C 0.23 (typical); Si 1.1 (typical); Mn 0.8 (typical); P ≤ 0.011; S ≤ 0.003; Cr ≤ 1.60.

Which standards cover Toolox 33?

Plate (6 – 130 mm): SSAB specification; EN 10029 tolerances; EN 10160 ultrasonic testing. Hardness: EN ISO 6506-1 (Brinell).

Up to what temperature can Toolox 33 be used?

Keeps its delivery properties after being heated up to 590 °C, the minimum factory tempering temperature; above that, SSAB does not guarantee the properties.

Which materials can replace Toolox 33?

Toolox 40 and Toolox 44, from the same family, with higher hardness; pre-hardened P20-type steels (1.2311) and quenched and tempered 4140 steel, with similar hardness and less toughness.

Where to buy Toolox 33 in Brazil?

Dustre supplies Toolox 33 as bar, plate, tube, block and forged or machined parts, subject to availability, with a quality certificate. Head office in Osasco/SP, branches in Joinville/SC and Baixo Guandu/ES, delivery across Brazil and export worldwide (export documents and 3.1 certificate; Incoterm agreed in the quote). For a quote, message Helena, our virtual assistant on WhatsApp +55 11 98649-0075, or write to [email protected].

Need Toolox 33?Bars, forgings and parts with EN 10204 3.1 certificate.

Toolox is a registered trademark of the SSAB group.

Forms and stock of Toolox 33

Dustre supplies Toolox 33 as plate, cut to size, with forged and machined parts to drawing (shafts, discs, rings and blocks) and a 3.1 certificate.

Not in stock at the moment: supplied to order, with lead time in the quotation.

See the full ready-to-ship stock · Request a quote for Toolox 33

Where to buy Toolox 33 in Brazil?

Dustre supplies Toolox 33 as bar, plate, tube, block and forged or machined parts, subject to availability, with a quality certificate. Head office in Osasco/SP, branches in Joinville/SC and Baixo Guandu/ES, delivery across Brazil and export worldwide (export documents and 3.1 certificate; Incoterm agreed in the quote). For a quote, message Helena, our virtual assistant on WhatsApp +55 11 98649-0075, or write to [email protected].

See also

HelenaVirtual assistant · WhatsApp

Request a quote

Subject: . Fill in and send: your request goes to our technical team and we reply by email.

More details (optional): tax ID, delivery, deadline and requirements
Requirements

Drawing, list or specification. Up to 5 files and 15 MB in total.

Send via WhatsApp

We use your data only to answer this quote. Privacy. · WhatsApp +55 11 98649-0075 · Mon–Thu 07:00–17:00 · Fri 07:00–16:00 (Brasília time)