Dustre
EN
Customer area

Alloy 59 – UNS N06059

Very-low-carbon nickel-chromium-molybdenum alloy, tungsten-free

Download data sheet (PDF)

Ni-Cr-Mo alloy with about 23% Cr and 16% Mo, carbon up to 0.010% and iron up to 1.5%. It resists oxidizing and reducing media, pitting and crevice corrosion in chlorides, and stress corrosion cracking. It is one of the C-family alloys with the highest overall resistance and keeps the weld zone resistant without post-weld treatment.

Technical review Oct 2026 · minimum values per the cited standard; physical properties are typical; values marked * to be confirmed in the standard · Clóvis de Oliveira Júnior · how we review

FamilyNickel alloy
UNSN06059
W.Nr. / EN2.4605 – NiCr23Mo16Al
PREN (Cr + 3.3 Mo, indicative)≈ 75

Designations and equivalents

Designations of Alloy 59 – UNS N06059
SystemDesignation
UNS N06059
W.Nr./EN 2.4605 – NiCr23Mo16Al
DIN NiCr23Mo16Al
Trade names Alloy 59; manufacturers' trade names (e.g. VDM Alloy 59, Nicrofer 5923 hMo) are trademarks of those manufacturers

Standards by product form

Standards for Alloy 59 – UNS N06059
FormStandard
Bar ASTM B574
Forging ASTM B564
Plate ASTM B575
Tube ASTM B622 (seamless), B619 and B626 (welded)
Fittings ASTM B366
Filler metal AWS A5.14 ERNiCrMo-13

Tolerances and HS codes

  • Forged bars (round and square): machining allowance from 2 mm (Ø 6–16 mm) to 24 mm (Ø 400–500 mm) on the diameter. E.g. Ø 100–125 mm finished: +7 mm, tolerance +6 / −0 (length up to 3,500 mm).
  • Forged discs: allowance of 4 to 9 mm on the diameter and 3 to 11 mm on the height, plus-only tolerance.
  • Cutting and machining: band saw −0 / +5 to +15 mm on length; waterjet +10 % of thickness on the diameter (min. 2 mm); machined parts −0 / +2 to +5 mm on the diameter. See the full tables (INF 002 and INF 003, the same for every alloy).
Tariff classification of Alloy 59: NCM, HS, HTS and CN by product form
FormNCM (Brazil, 8 digits)HS (international, 6 digits)HTS (USA, 10 digits)*CN (European Union, 8 digits)*
Forged bar7505.12.107505.127505.12.30007505 12 00
Hot-rolled bar7505.12.107505.127505.12.30007505 12 00
Plate (> 10 mm, width ≥ 600 mm)7506.20.007506.207506.20.30007506 20 00
Seamless pipe7507.12.007507.127507.12.00007507 12 00
Welded pipe7507.12.007507.127507.12.00007507 12 00
Flange and fitting7507.20.007507.207507.20.00007507 20 00

Tariff class: nickel alloy (by chemical composition, under the Chapter 72 Notes and Section XV Note 5).

*: US and EU codes for reference. NCM per current legislation (General Rules of Interpretation, Notes to Chapters 72, 74 and 75 and Section XV Note 5). Confirm the final code with your customs broker according to the item size and finish. HS = first 6 digits of the NCM.

Chemical composition (%)

ASTM B574 (UNS N06059)

Chemical composition of Alloy 59 – UNS N06059, per ASTM B574 (UNS N06059)
ElementRange (%)
Ni balance
Cr 22.0 – 24.0
Mo 15.0 – 16.5
Fe ≤ 1.5
Al 0.1 – 0.4
Co ≤ 0.3
Mn ≤ 0.5
Si ≤ 0.10
C ≤ 0.010
P ≤ 0.015
S ≤ 0.010

Calculate the PREN of Alloy 59 in the PREN calculator →

Mechanical properties

solution annealed (ASTM B574 / B564)

Mechanical properties of Alloy 59 – UNS N06059
PropertyValue
Yield strength (0.2%) ≥ 310 MPa
Tensile strength ≥ 690 MPa
Elongation ≥ 45%

Typical physical properties

Typical values at 20 °C
PropertyValue
Density 8.6 g/cm³
Melting range 1,310 – 1,360 °C*
Modulus of elasticity 210 GPa*
Thermal conductivity (20 °C) 10.4 W/m·K*
Thermal expansion (20–100 °C) 11.9 µm/m·K*

Calculate the weight of Alloy 59 bar, plate or pipe →

Heat treatment, welding and machining

ItemUsual practice
Service temperature An alloy for aqueous corrosion, from cryogenic up to about 425 °C in the ASME allowable stress tables (II-D)*. Avoid prolonged exposure between 600 and 1,000 °C, the range of intermetallic phase precipitation.
Heat treatment Solution annealing between 1,100 and 1,180 °C* with rapid cooling (water or forced air). Not age hardenable.
Welding Good weldability, with no preheating or post-weld treatment. Filler metals: AWS A5.14 ERNiCrMo-13 (TIG and MIG) and AWS A5.11 ENiCrMo-13 (covered electrode). Low heat input and interpass up to 150 °C.
Machining Difficult: it work hardens quickly; use carbide, low speed, constant feed without stopping on the part, and abundant coolant.

Plan an open-die forging in Alloy 59: reduction, slenderness and how much material to send →Simulate the cutting plan of the ingot or bar →

Typical applications

  • Reactors and heat exchangers in the chemical industry
  • Flue gas desulfurization (FGD) and scrubbers
  • Bleaching in pulp and paper
  • Pharmaceuticals and fine chemicals
  • Effluent treatment and incineration
  • Components in seawater and hot brines
  • Weld overlay cladding

Alternatives: Hastelloy C-276 and C-22 in much the same media; Inconel 625 in moderate media, at lower cost; Hastelloy B-2 in hot concentrated hydrochloric acid.

Compare alloys by corrosive medium, concentration and temperature →

Alloy 59: complete guide

What Alloy 59 is

Alloy 59 (UNS N06059, W.Nr. 2.4605) is a nickel alloy of the nickel-chromium-molybdenum group, the same as C-276 and C-22. It has more chromium than C-276 (22.0–24.0% versus 14.5–16.5%) and practically the same molybdenum (15.0–16.5% versus 15.0–17.0%), contains no tungsten, and limits carbon to 0.010% and iron to 1.5%, which reduces precipitation in the weld heat-affected zone.

Chemical composition and the role of the elements

Chromium (22 to 24%) protects in oxidizing media; molybdenum (15 to 16.5%) protects in reducing media and against pitting and crevice corrosion; aluminum (0.1 to 0.4%) is added as a deoxidizer. By the Cr + 3.3 Mo formula, the PREN is around 75, among the highest in the family.

Mechanical properties

Solution annealed, ASTM B574 requires a minimum yield strength of 310 MPa, a minimum tensile strength of 690 MPa and a minimum elongation of 45%. The alloy is not heat-treatable; strength only increases by cold work.

Corrosion and limits of use

It resists dilute sulfuric and hydrochloric acids, acids with chlorides, wet chlorine, hypochlorites, seawater and hot brines, including media that alternate between oxidizing and reducing. To choose between 59 and other alloys in your medium, use the steel by corrosive medium calculator and the PREN calculator.

Supply forms and Dustre services

Bars and blocks forged in open die, cut to size on a band saw, with machining, solution annealing in our own furnaces and hardness, tensile and impact testing. Material with a 3.1 inspection certificate and heat traceability.

Frequently asked questions

What is the chemical composition of Alloy 59?

Per ASTM B574 (UNS N06059): Ni balance; Cr 22.0 – 24.0; Mo 15.0 – 16.5; Fe ≤ 1.5; Al 0.1 – 0.4; Co ≤ 0.3.

Which standards cover Alloy 59?

Bar: ASTM B574. Forging: ASTM B564. Plate: ASTM B575. Tube: ASTM B622 (seamless), B619 and B626 (welded). Fittings: ASTM B366. Filler metal: AWS A5.14 ERNiCrMo-13.

Up to what temperature can Alloy 59 be used?

An alloy for aqueous corrosion, from cryogenic up to about 425 °C in the ASME allowable stress tables (II-D)*. Avoid prolonged exposure between 600 and 1,000 °C, the range of intermetallic phase precipitation.

Which materials can replace Alloy 59?

Hastelloy C-276 and C-22 in much the same media; Inconel 625 in moderate media, at lower cost; Hastelloy B-2 in hot concentrated hydrochloric acid.

Where to buy Alloy 59 in Brazil?

Dustre supplies Alloy 59 as bar, plate, tube, block and forged or machined parts, subject to availability, with a quality certificate. Head office in Osasco/SP, branches in Joinville/SC and Baixo Guandu/ES, delivery across Brazil and export worldwide (export documents and 3.1 certificate; Incoterm agreed in the quote). For a quote, message Helena, our virtual assistant on WhatsApp +55 11 98649-0075, or write to [email protected].

Need Alloy 59?Bars, forgings and parts with EN 10204 3.1 certificate.

Forms and stock of Alloy 59

Dustre supplies Alloy 59 as bar, plate, pipe and tube, forgings and flanges and fittings, cut to size, with forged and machined parts to drawing (shafts, discs, rings and blocks) and a 3.1 certificate.

Not in stock at the moment: supplied to order, with lead time in the quotation.

See the full ready-to-ship stock · Request a quote for Alloy 59

Where to buy Alloy 59 in Brazil?

Dustre supplies Alloy 59 as bar, plate, tube, block and forged or machined parts, subject to availability, with a quality certificate. Head office in Osasco/SP, branches in Joinville/SC and Baixo Guandu/ES, delivery across Brazil and export worldwide (export documents and 3.1 certificate; Incoterm agreed in the quote). For a quote, message Helena, our virtual assistant on WhatsApp +55 11 98649-0075, or write to [email protected].

See also

HelenaVirtual assistant · WhatsApp

Request a quote

Subject: . Fill in and send: your request goes to our technical team and we reply by email.

More details (optional): tax ID, delivery, deadline and requirements
Requirements

Drawing, list or specification. Up to 5 files and 15 MB in total.

Send via WhatsApp

We use your data only to answer this quote. Privacy. · WhatsApp +55 11 98649-0075 · Mon–Thu 07:00–17:00 · Fri 07:00–16:00 (Brasília time)