Dustre
EN
Customer area

Special alloys for oil and gas

In oil and gas, the alloy comes from three questions: is there H2S (sour service), is there seawater or chlorides, and what are the pressure and temperature. With H2S, the material must meet NACE MR0175 / ISO 15156. In seawater, use PREN above 40: super duplex, 6Mo or Inconel 625.

Technical review Oct 2026

Conditions and recommended alloys

Typical oil and gas conditions and alloys used
Application or mediumWhat attacks the partAlloys used
Seawater, injection and coolingPitting and crevice corrosion by chloridesSuper duplex 2507 / F53 / S32750, Super duplex Zeron 100 / F55 / S32760, 254 SMO / F44, Inconel 625 / Alloy 625
Sour service (H2S)Sulfide stress cracking; NACE MR0175 hardness limitsDuplex 2205 (F51 / S31803), Inconel 625 / Alloy 625, Incoloy 825, Inconel 718
Wellhead and christmas tree (API 6A)High pressure and low temperatureSAE 4140, ASTM A182 F22 / P22 (2¼Cr-1Mo), ASTM A182 F6NM, Inconel 718
Pumps, shafts and valvesErosion, wear and corrosionNitronic 50 (XM-19), 17-4PH stainless steel, Super duplex 2507 / F53 / S32750

The table is a guide. To compare alloys in a defined medium, concentration and temperature, use the steel by corrosive medium selector and the PREN calculator.

Industry standards and requirements

  • NACE MR0175 / ISO 15156: materials and maximum hardness for equipment exposed to H2S.
  • API 6A: wellhead and christmas tree equipment.
  • NORSOK M-650: qualification of manufacturers of duplex, super duplex and nickel alloys.
  • ASTM A923: intermetallic phase test for duplex and super duplex.
  • ASTM A182 and B564: forgings and flanges in stainless, duplex and nickel.

Parts we supply for oil and gas

ASME B16.5 flanges, API 6A forgings, fittings and shafts. We forge, cut and machine to your drawing, with a 3.1 certificate. See parts and equipment · See services

Catalog materials used in oil and gas

Frequently asked questions

Which alloy to use in seawater?

Super duplex (F53, F55), 6Mo (F44) or Inconel 625, all with PREN above 40. Duplex 2205 has a PREN of about 35 and works in seawater only in milder conditions: low temperature and no crevices.

What is NACE MR0175?

It is the standard (also ISO 15156) that defines which materials can be used in contact with H2S in oil and gas production, and with what maximum hardness, to avoid sulfide stress cracking.

What certificate do you deliver with?

With the mill's 3.1 inspection certificate (EN 10204), showing heat, chemical composition and mechanical properties. Extra tests, such as PMI, ultrasonic and hardness, are included in the quote when the project requires them.

Other industries

Need the right alloy for oil and gas?Tell us the application, the medium and the temperature. We recommend the alloy and quote with a 3.1 certificate.
Request a quoteWhatsApp
HelenaVirtual assistant · WhatsApp

Request a quote

Subject: . Fill in and send: your request goes to our technical team and we reply by email.

More details (optional): tax ID, delivery, deadline and requirements
Requirements

Drawing, list or specification. Up to 5 files and 15 MB in total.

Send via WhatsApp

We use your data only to answer this quote. Privacy. · WhatsApp +55 11 98649-0075 · Mon–Thu 07:00–17:00 · Fri 07:00–16:00 (Brasília time)