Special alloys for mining and steelmaking
In mining, shafts and crushing and grinding parts call for quenched and tempered alloy steel (4140, 4340) for impact and fatigue strength. In acid leaching, duplex, super duplex and Alloy 20. In furnaces and hot rolling, 310S and 446 heat-resistant stainless.
Conditions and recommended alloys
| Application or medium | What attacks the part | Alloys used |
|---|---|---|
| Crushing, grinding and power transmission | Fatigue and impact | SAE 4140, SAE 4340 |
| Acid leaching and hydrometallurgy | Sulfuric acid with chlorides | Duplex S32205 / F60, Super duplex 2507 / F53 / S32750, Alloy 20 (Carpenter 20), 904L stainless steel |
| Furnaces and hot rolling | High-temperature oxidation | 310S stainless steel, AISI 446, Incoloy 800HT |
| Slurry and tailings | Erosion and corrosion | Duplex 2205 (F51 / S31803), Ferralium 255 / F61 |
The table is a guide. To compare alloys in a defined medium, concentration and temperature, use the steel by corrosive medium selector and the PREN calculator.
Industry standards and requirements
- ASTM A29 and SAE J404: 4140 and 4340 alloy steels.
- ASTM A182 and A479: stainless and duplex forgings and bars.
- ASTM A240: heat-resistant stainless plates.
Parts we supply for mining and steelmaking
Shafts, bushings, forged rings, rolls and wear parts. We forge, cut and machine to your drawing, with a 3.1 certificate. See parts and equipment · See services
Catalog materials used in mining and steelmaking
Frequently asked questions
4140 or 4340?
Both are quenched and tempered alloy steels. 4340 has nickel and hardens deeper, so it is the choice for large-diameter shafts and impact loads; 4140 serves most smaller parts.
Which stainless for furnaces?
310S withstands oxidation in air up to about 1,150 °C in continuous service and 1,035 °C with thermal cycling. 446 resists sulfur-bearing gases well, but becomes brittle after long exposure. In carburizing atmospheres, Incoloy 800HT is safer.
What certificate do you deliver with?
With the mill's 3.1 inspection certificate (EN 10204), showing heat, chemical composition and mechanical properties. Extra tests, such as PMI, ultrasonic and hardness, are included in the quote when the project requires them.